Your Watersport


Shop by Brand


 

NEONWELD

NEONWELD

NEONSEAM

NEONSEAM

LIQUIDSEAM

LIQUIDSEAM

NEONWELD 

Made by a 4mm razor thin Neonseam bonding process, eliminating the need for stitched seams. No stitching means no pinholes... which means no leakage! 

NEONSEAM

Panels are glued and blind stitched and finished with a 4mm razor thin coloured liquid silicon based urethane. The result being a strong yet flexible seam that is watertight and durable whilst reducing the abrasion to skin. 


 

LIQUIDSEAM

Panels are glued and blind stitched. The seam is then sealed using a  coloured liquid silicon based urethane which reinforces the seam giving each suit a100% water seal.


 

BLINDSTITCH

BLINDSTITCH

FLATLOCK

FLATLOCK

X-FLEX/X-FLEX THERMAL

X-FLEX/X-FLEX THERMAL

BLINDSTITCH

Panels are double glued and then butted together followed by stitching that does not penetrate all the way through the neoprene. Inside the wetsuit, heat welded tape goes over the seams in high stress areas, this further strengthens the seams and increases insulation.

FLATLOCK

Neoprene is lapped together and then stitched, this creates a flat, flexible and comfortable seam. Flatlock stitching can be identified by a band of interlocked thread on both sides of the wetsuit, sometimes utilising a coloured thread for visual effect

X-FLEX / X-FLEX THERMAL

150% stretch neoprene is used in our high performance wetsuits. The latest X-FLEX neoprene is 10% lighter, absorbs less water and has a softer, more comfortable feel. 

G-FLEX

G-FLEX

D-FLEX

D-FLEX

DURATEX

DURATEX

G-FLEX

100% stretch neoprene  giving unrestricted range of movement and warmth.

D-FLEX

50% stretch neoprene. Flexible, warm, durable neoprene allowing you to perform for longer.   

DURATEX

Highly abrasion resistant Dura-Tex nylons created by applying a resin coating to the outer surface of a double knit nylon. Increases resistance to abrasion by up to 4-5 times.   


 

POWERTEX

POWERTEX

BOLTRY

BOLTRY

TITANIUM2

TITANIUM2

POWERTEX

Four way stretch high specification knee panels designed to resist the most harsh elements while providing maximum flexion and extension of the knee


 

BOLTDRY

Introducing BOLT DRY Guls new and exclusive fastest drying neoprene yet. The ultra quick dry core wicks water away from the skin creating a cushion of air between the body and suit, giving ultimate insulation and warmth.

TITANIUM2

Used in the main body panels of most of our wetsuits. T2 Neoprene acts in a similar way to a survival blanket, and reflects body heat back to the body

THERMOSPAN

THERMOSPAN

GLIDE SKIN

GLIDE SKIN

USB FLUSH

USB FLUSH

THERMOSPAN

Engineered by our scientists so that your core body temperature locks in the heat. By wicking away your body moisture the lightweight thermal insulation traps warm air all around you. Keeping your core body warm helping blood to pump around your body creating your own central heating system. 

GLIDE SKIN

Allows you to slip in and out of your wetsuit with ease and comfort.The flexible rubberised coating means you wont get painful rubbing around your neck, allowing you to surf, sail and exercise in the water all day without irritation.

USB FLUSH

Internal barrier shield prevents water penetration whilst increasing insulation and maintaining the wetsuits exibility.

AQUA RING

AQUA RING

SNAKESKIN

SNAKESKIN

AERO-COMB

AERO-COMB

AQUARING

Newly designed wrist seals to reduce water penetration whilst increasing comfort.

SNAKESKIN

Durable, water repellant and anti-abrasive membrane applied to outer nylon. This technology is guaranteed to be harder wearing, absorb less water and contain quick drying properties.


 

AERO-COMB

Aero-Comb minimises weight while maximising its internal area, this space allows trapped air to heat up and insulate your core. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  Bookmark this page in your web browserwww.nzsailing.net - Wetsuite technologyCartNo Items in your Cart