Harken 365 Carbo Cam Standard

Ha0365



 

 

 

Harken Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls.

 

Multiple rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.

 

The easy entry system allows line to engage without being drawn through the cam; just pull the line straight down and the cam opens and holds perfectly.

 

Lightwight, fiber-reinforced Carbo-Cams® are for racing where weight is critical, or where adjustments are less frequent.

 

Tough, lightweight Cam-Matic cleat has carbon-matrix pawls, two rows of carbon-black Delrin® ball bearings, and stainless steel wear-strip.

 

An optional fairlead allows the cleat to be used when lines enter or leave the cam at unfair angles.

 

Specifications:


Height: 1-3/32"
Length: 2-9/16"
Width: 1-1/4"
Weight: 1.44 oz.
Minimum line diameter: 1/8"
Maximum line diameter: 3/8"
Fastener spacing: 1-1/2"
Maximum working load: 200 lb.
Breaking load: 500 lb.
Fasteners: #10 (5 mm) FH
.



Buy Harken 365 Carbo Cam Standard in NZ.

Visit our Factory shop

9.00am - 5.00pm Mon to Fri
9.00am - 1pm Saturday




 

Contact Us

 

Total donations-Discounts $1,590,017.68

nzsailing.com is keen to help Sailing & Watersports clubs around New Zealand and Asia Pacific so please contact us if you have an Event coming up soon and would like us to help with prizes.  Please Register or Contact us with any questions 

About NZ Sailing Ltd.

 We Sell & Ship worldwide* quality sailing & watersport products at Factory prices from suppliers & manufacturers who share our goals.  *Please note all prices are in New Zealand Dollars (NZD) and all orders over NZD $500 are shipped for free to international customers using the postal service.

 

© 2024 New Zealand Sailing Ltd | Website by eDIY